You are in the perpetual quest for brightness and to solve your problem, you have opted for roller blinds.
It is a perfect choice, there is no better than them both for the optimization and the maximization of the brightness in the rooms of your interior.
However, the installation of these can make holes, and there, it is a waste for your decoration. In this article, you will have detailed mechanisms for the installation of roller blinds without drilling.
What are the Traditional Techniques For Installing a Blind?
Commonly, the installation of roller shades varies depending on the family to which it belongs. There are two main families of blinds, namely: roller blinds and boat blinds.
While we recognize the roller blinds by the winding around an axis. Boat blinds are distinguished by vertical folding when they go up highlighting large parallel sections.
When it comes to the installation of the blind, classically, it goes through the installation by drilling followed by the screwing of supports on which the blind is then positioned. There is also another traditional means of installation of the blind.
It consists in arriving the blinds on the supports at the chosen location in order to accommodate the blind and as in the previous technique, the window is drilled into the holes of the supports intended for this.
This is how the screws come to lodge in the drills and ensure a good hold. They may seem effective, but we know that you want to install your blinds without drilling.
Read Also:
What is the Procedure For Installing a Boat Blind While Avoiding Drilling?
If you want to install a boat blind without any question of drilling anything, you only need to have the fixing brackets on the PVC window opening. These brackets are positioned on top of the upright of the open window.
You will need a clamping screw for adjustment. This step is followed by the positioning of the awning rail in the supports, and this system will not disturb the closing of the opening.
How is a No-Drill Reel Installed?
When it comes to a roller blind, the installation mode without drilling is totally different from the boat blind. Here you must first assemble the fasteners without drilling the roller blind.
Once the non-drill fasteners have been assembled, you are required to position the fasteners without drilling on either side of the winding tube. This step is followed by the clips safe of the roller blind on the window opening.
Once you’ve gone through this step, you’ve installed your blind without drilling anything. You find that it is possible to install blinds without drilling and keep intact the equipment of this house of which you are still the tenant.
